AT&T 6100 user manual Batteries, Charging the Handset Battery Pack

Page 14

6100_book_1ATT 11/25/00 12:37 PM Page 13

BATTERIES

Charging the Handset Battery Pack

This battery should remain charged up to six days with the ringer turned on and up to 12 days with the ringer off. A fully charged battery provides an average talk time of about six hours.

The battery pack needs charging when:

•A new battery is installed in the handset.

•The phone beeps twice when you press P.

•The phone light flashes slowly.

Place the handset in the base so the CHARGING light turns on. The battery pack is typically fully charged in eight hours.

You can keep the battery fully charged by returning the handset to the base after each use.

If you repeatedly get a low battery indicator, even after eight hours

of charging, the battery should be replaced.

13

Image 14

Contents MHz Cordless Telephone Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Install the handset battery InstallationBefore You Install Attach the belt clip to the cordless handset optionalTable/Desk Installation Check for dial tone Position the wall mount adapter on the base Wall InstallationConnect the telephone line cord Connect the power cord Follow Steps 4-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Handset VolumeAccess Internet Calling Redial Make or AnswerHandset Locator Handset Ringer Style Ringer Off/Battery SaveMaking Internet Calls Headset Jack Operating RangeTelephone Memory Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone