AT&T 6100 user manual Check for dial tone

Page 6

6100_book_1ATT 11/25/00 12:37 PM Page 5

INSTALLATION

Standard electrical outlet

Modular telephone jack

1 Connect the telephone line cord.

2 Connect the power cord.	3 Connect microphone
	and speaker cords.

4Charge the handset battery.

Place the handset in the base. Charge the battery for at least 24 hours the first time. After the first charge, the battery is typically fully charged overnight.

5Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5

Image 6

Contents MHz Cordless Telephone Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Install the handset battery InstallationBefore You Install Attach the belt clip to the cordless handset optionalTable/Desk Installation Check for dial tone Wall Installation Connect the telephone line cord Connect the power cordPosition the wall mount adapter on the base Follow Steps 4-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Handset VolumeAccess Internet Calling Redial Make or AnswerHandset Locator Ringer Off/Battery Save Making Internet CallsHandset Ringer Style Headset Jack Operating RangeTelephone Memory Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels