Getting started
Battery installation & charging
After battery installation, place each handset in the telephone base or a charger and allow it to charge for 16 hours before use. You can keep the battery packs charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about 16 hours. The average talk time on a fully charged battery is about eight hours depending on environmental conditions, standby time is approximately four days.
Press in and downward on | Plug the battery |
the tab to open the battery | pack connector |
compartment cover. | into handset. |
Plug power adapter into the jack on the underside of charger as shown, then plug into an electri-
Place the battery pack and wires in the compartment.
Place handset in base or charger to charge for 16 hours before first use.
Slide battery compart- ment cover up until it clicks closed.
cal outlet.
LOW BATTERY
Low battery indicator Return handset to base or charger to recharge when this symbol flash- es. (Handset will beep when battery is low.)
Caution: Use only supplied rechargeable battery or replacement battery pack (part number
NOTE: Use only the power adapter supplied with this product. If you need a replacement, call 1 (800)