AT&T 984QSG quick start Feature setup, Assign an extension number to your phone

984QSG_(Rev6)ml23.05.06 5/23/06 11:27 AM Page 5

Feature setup

Feature setup, memory programming and some individual feature operations for the 984 use menus shown in the screen display. For detailed instructions for using the menus, see Menu operation beginning on page 22 of your User’s Manual, Part 2.

Assign an extension number to your phone

Every individual phone in your telephone system MUST be assigned a unique extension number for the intercom feature to work.

k no	1.	Press Eto begin feature setup.
	2.	Press -until the screen display includes
i		PHONEHSETTINGS.
	3.	Press E. The screen display includes
		EXTENSIONHNO and the current setting.

4.Press <or >to change the extension number (11h…h26).

5.When the desired extension number is shown, press -to save your choice. The screen display includes RINGERHON/OFF.

￿NOTE: If you duplicate an extension number already in use, you will hear a repeating short ring (error ring) and the screen display will include EXThXXhishalready usedhAssignhnewhEXTh#hif the phone is in idle mode. If the phone is in the programming mode, you will hear the repeating short ring only. Repeat steps 1-5 at the ringing phone to assign a different extension number (from 11-26).

6.Press and hold Eto return to the idle screen.

￿NOTE: You can exit feature setup and return to the idle screen any time. Simply press and hold E.

5