984QSG_(Rev6)ml23.05.06 5/23/06 11:27 AM Page 4
Table/desk installation
continued from page 3
3. Connect the power adapter to the telephone.
Use only the power adapter provided with this product.
To obtain a replacement, call 1 (800)
Plug one end of the power adapter into the jack labeled POWER on the back of the phone. Plug the other end into a standard electrical outlet not controlled by a wall switch.
Standard |
electrical |
outlet |
Power jack
Power adapter
4.Initialization.
If no battery is installed when you connect the power cord, the phone runs a quick
NOTE: The phone will run through this same initialization any time it is reconnected to AC power if a working battery is not installed (for example, after a power failure or when the unit has been unplugged).
5.Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial tone, please see In case of difficulty beginning on page 121 of your User’s Manual, Part 2 for details.
4