Turn line usage on or off for each line

984QSG_(Rev6)ml23.05.06 5/23/06 11:27 AM Page 6

Turn line usage on or off for each line

If you are not using all four phone lines at this extension, you need to turn off line usage for the unused lines. If you expand to a second, third or fourth line, turn line usage back on. Line 1 must be turned on for the intercom to work.

NOTE: You may use any combination of lines. Lines used do not need to be in order. For example, line usage can be turned on for Lines 1 and 3 and turned off for Lines 2 and 4.

You may also restrict the use of certain lines on this phone to intercom and paging only, by turning off line usage for each line you want restricted. When line usage is turned off, that line cannot be used to answer incoming calls or to make outgoing or transfer calls.

k o	1.	Press Eto begin feature setup.
	2.	Press -until the screen display includes
n
i		SPECIALHOPTIONS.
	3.	Press E. The screen display includes

LINEHUSAGE.

4.Press E. The screen display includes

L1HUSAGE and the current setting for this line.

5.Press <or >to toggle between On and Off for the line shown.

6.Press -to save the current setting for this line and move to the next line with its current line usage setting.

7.Repeat steps 5 and 6 to set line usage for other lines at this extension.

8.When you are finished setting line usage, press - until the screen display includes DONE.

9.Press E. The screen display includes

LINEHUSAGE.

10.Press and hold Eto return to the idle screen.

NOTE: You can exit feature setup and return to the idle screen any time. Simply press and hold E.