MEMO | ANNC |
1
CLOCK
“Sunday”
2
SKIP/REPEAT
“Monday”
Press until correct day is spoken.
3
CLOCK
“12 PM”
4
SKIP/REPEAT
“1 PM”
Press until correct hour is spoken.
5
CLOCK
“0”
6
SKIP/REPEAT
“1”
Press until correct minute is spoken.
7
CLOCK
“2004”
8
SKIP/REPEAT
“2005”
Press until correct year is spoken.
9
CLOCK
“Monday, 1 pm, 2005”
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system announces the day and time the message was received.
Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly.
To begin, press and hold the CLOCK button for 2 seconds. The system uses voice prompts to guide you.
Each time you press SKIP, the day, hour, minute or year advances by one. Each time you press REPEAT, the day, hour, minute or year is reduced by one.When you hear the correct setting, press CLOCK to move to the next setting.
To check day and time
You can press CLOCK at any time to hear the current day and time without changing it.
NOTE: The answering system must be on to review or change settings.
18