OK to confirm it.
Choose Tone Style:
Low Middle High
(2)Ring Volume Control
User can adjust ring volume by pressing Í or Î on the keypad to decrease or increase volume.
4.Indicate Forward Type
There are two selections to activate or deactivate forward function. After selection please press OK
i.Activate: choose under which situation to forward call to another endpoint. After selection please press OK, then enter LINE NUMBER of another endpoint prepared to forward to.
A.Busy
When SP5100 IP Phone is in busy status, the incoming call will be directly forwarded to the assigned phone number.
B.No response
When SP5100 IP Phone is continuing ringing around 10 seconds, the incoming call will be directly forwarded to the assigned phone number.
C.Unconditional
It is included the above two types. Whether the IP Phone is in which status, it will be automatically forwarded to the assigned phone number.
ii.Deactivate: choose under which situation to deactivate forward function. After selection, please press OK, then user can see LINE NUMBER of the endpoint which is already configured to forward to, now press OK again.
Note: The number that user prepares to forward to is E.164 number which is registered on the Gatekeeper.
5. Message Box
If there is an unanswered IP call, it will be kept in message box . MESSAGE LED will be flashing until user press MESSAGE to check miss call and
•New Call：to see all
•History：to see all records in message box.
15