MicroNet Technology SP5100 user manual 13 h323 command

5.13 [h323] command

•-print: display H.323 stack information and configuration.

•-mode: configure SP5100 IP Phone as Gatekeeper or Peer-to-Peer Mode.

Usage: h323 –mode 0 / 1(0 for Gatekeeper mode,1 for Peer-to-Peer mode)

•-gk: set Main Gatekeeper IP address (h323 –gk “xxx.xxx.xxx.xxx”) or URL address (Domain Name Server must be configured. Please refer to [ifaddr] command) . User can set IP as 255.255.255.255 and let IP Phone auto discovery for Gatekeeper. Please notice in this case, user must enable Gatekeeper discovery function. Please refer to 5.-gknameand 10.-gkdis.

•-dfgw:to set IP address of default gateway, this function is the same as Microsoft NetMeeting.

1.To implement this feature both calling and called endpoints must be under peer-to-peer mode.

2.If the called party is FXO products, such as Micronet SP5050, which Have to

set sysconf –2nddial 0 to make one-stage dialing.

I. Dial remote PSTN number under default gateway, IP Phone will automatically dial to default gateway, then default gateway will dial this number to PSTN side.

II.For example, user wants to dial to ext.888 under Micronet SP5050, user only have to dial 888 from IP Phone.

3.If called party is FXS products such as Micronet SP5004: user can dial line number of Micronet SP5004 from IP Phone.

For example ,user wants to dial to Micronet SP5004, the configuration of

47