Uniden Answering Machine manual Mounting the Base Unit on a Wall, Standard wall plate mounting

Page 15

Mounting the Base Unit on a Wall

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1) Plug the AC adapter into the DC IN 9V jack.

2)Wrap the AC adapter cord inside the molded wiring channel as shown.

3) Plug the AC adapter into a standard 120V AC wall outlet.

4) Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown.

5) Plug the telephone line cord into the telephone outlet.

6) Raise the antenna to a vertical position.

7)Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

www.uniden.com

DO NOT use an AC outlet controlled by a wall switch.

G E T T I N G S TA R T E D [ 15 ]

GETTING STARTED

Image 15

Contents Page Page Reference Guide Contents Welcome Features Dual Handsets Controls and FunctionsBase Charging Cradle Setting up the Phone Choose the best locationDo the following steps Use only Install the rechargeable battery packs into both handsetsE T T I N G S TA R T E D Cleaning the battery charging contacts Low battery alertHandset makes good contact Connect the base unit and charging cradleFollow these simple steps to register Before Using, Register Second Handset to the Base UnitTo receive a transfer call from the second handset When to Re-register HandsetsCall Transfer Feature To transfer a call to the second handsetStandard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting Caller ID options Setting Menu OptionsTo enter your Area Code Choosing the dialing modeHS2 Setting the languageHandset Off Base or Charging Cradle Making and Receiving CallsTemporarily Mute Ringer Adjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volume Earpiece volumeTone Dialing Switch over RedialTraveling Out-of-Range Selecting a Different Channel Find HandsetsFlash and Call Waiting Voice Mail Waiting Indicator Press the mem or select/channel key Storing Phone Numbers and NamesE M O R Y D I a L I N G If you make a mistake while entering a name Steps for Entering Names and Special CharactersMemory dialing from Standby Mode Memory dialing from Talk ModeMaking Calls with Memory Dialing Chain Dialing Editing a Stored Name and/or Phone Number Replace Memory? Yes Memory01 Stored Movies Press the select/channel or delete/transfer key Erasing a Stored Name and Phone NumberRocketDial Storing and Editing the RocketDialMaking Calls with the RocketDial Deleting the RocketDial When the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID Viewing the Caller ID Message List Deleting a Caller ID message When the pointer is at YesWhen the pointer is at No Deleting Information from the Caller ID ListDisplay returns to the summary screen Using the Caller ID List Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Storing Caller ID messages in Memory dialing To attach the beltclip Installing the BeltclipHeadset Installation Changing the Digital Security CodeMaintenance Battery replacement and handlingPower Failure Symptom Suggestion TroubleshootingSevere noise interference Case Action Liquid DamageFrequency Battery InformationGeneral Information AC Adapter InformationPrecautions Installation Considerations Terminal Equipment K, L IndexAt Uniden, we’ll take care of you