Symptom | Suggestion |
Severe noise interference. | • Keep both handsets away from microwave ovens, computers, remote control |
| toys, wireless microphones, alarm systems, intercoms, room monitors, |
| fluorescent lights, and electrical appliances. |
| • Move to another location or turn off the source of interference. |
The Caller ID does not display. | • The handset was picked up before the second ring. |
| • The call was placed through a switchboard. |
| • Call your local telephone company to verify your Caller ID service is current. |
| • Charge the handset. |
Handset No.1 or No.2 | • Make sure the battery pack is connected to the handset and fully charged. |
is not working. |
|
“Unavailable” message is | • Make sure the other handset is not already in use. Both handsets cannot be in |
displayed on the LCD screen of | talk mode at the same time. |
the handset. | • Place the handset in the base for at least 5 seconds to |
| • Make sure the handset is not too far from the base when trying to use. |
The handset doesn’t communicate | • |
with the base or the other handset. | • Make sure that you have registered the second handset. |
No | • Only one handset at a time can talk with an outside caller. To allow the |
| other handset to talk to the caller, transfer the call. |
Voice Message Indication | • Contact your local telephone company to make sure that your telephone |
does not work. | receives FSK message signaling. |
If you still have a problem. | • Call our customer hotline at |
|
|
[ 44 ] A D D I T I O N A L I N F O R M AT I O N | www.uniden.com |