Uniden Answering Machine Install the rechargeable battery packs into both handsets, Use only

Page 9

B. Install the rechargeable battery packs into both handsets

Both handsets are powered by rechargeable battery packs.

The battery recharges automatically when the handset is placed in the base unit or charging cradle.

Charge the handset battery packs for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged.

1)Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2)Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.

3)Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

www.uniden.com

• Use only the

Uniden (BT-905) rechargeable battery pack supplied with your cordless telephone.

• Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday through Friday from 8:00 a.m. to 5:00 p.m. or on line at

www.uniden.com

• Place the second handset in the charger with the keypad facing forward for 15-20 hours before use.

G E T T I N G S TA R T E D [ 9 ]

GETTING STARTED

Image 9

Contents Page Page Reference Guide Contents Welcome Features Dual Handsets Controls and FunctionsBase Charging Cradle Setting up the Phone Choose the best locationDo the following steps Use only Install the rechargeable battery packs into both handsetsE T T I N G S TA R T E D Cleaning the battery charging contacts Low battery alertHandset makes good contact Connect the base unit and charging cradleFollow these simple steps to register Before Using, Register Second Handset to the Base UnitCall Transfer Feature When to Re-register HandsetsTo transfer a call to the second handset To receive a transfer call from the second handsetStandard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting Caller ID options Setting Menu OptionsTo enter your Area Code Choosing the dialing modeHS2 Setting the languageHandset Off Base or Charging Cradle Making and Receiving CallsHandset ringer tone and volume Adjusting the Handset Ringer and Earpiece VolumeEarpiece volume Temporarily Mute RingerTone Dialing Switch over RedialTraveling Out-of-Range Selecting a Different Channel Find HandsetsFlash and Call Waiting Voice Mail Waiting Indicator Press the mem or select/channel key Storing Phone Numbers and NamesE M O R Y D I a L I N G If you make a mistake while entering a name Steps for Entering Names and Special CharactersMemory dialing from Standby Mode Memory dialing from Talk ModeMaking Calls with Memory Dialing Chain Dialing Editing a Stored Name and/or Phone Number Replace Memory? Yes Memory01 Stored Movies Press the select/channel or delete/transfer key Erasing a Stored Name and Phone NumberRocketDial Storing and Editing the RocketDialMaking Calls with the RocketDial Deleting the RocketDial When the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID Viewing the Caller ID Message List When the pointer is at No When the pointer is at YesDeleting Information from the Caller ID List Deleting a Caller ID messageDisplay returns to the summary screen Using the Caller ID List Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Storing Caller ID messages in Memory dialing Headset Installation Installing the BeltclipChanging the Digital Security Code To attach the beltclipMaintenance Battery replacement and handlingPower Failure Symptom Suggestion TroubleshootingSevere noise interference Case Action Liquid DamageGeneral Information Battery InformationAC Adapter Information FrequencyPrecautions Installation Considerations Terminal Equipment K, L IndexAt Uniden, we’ll take care of you