REMOTE COMMAND LIST
| Press | To | |
| 00 | Set the FP107 to not answer calls. | |
|
|
|
|
| 01 | Set the FP107 to answer calls. |
21Play all messages.
22Announce all Caller ID records.
31Play new messages. .
32Announce new Caller ID information.
4Monitor the room for 20 seconds. Press 4 to repeat monitoring.
5Delete all messages (except new messages). The FP107 says “Erase”, then press 1
5Delete all Caller ID calls (except new Caller ID calls). The FP107 says “Erase”, then press 2
6Stop playback or recording.
8Change OGM 1. After the FP107 beeps, begin speaking. When you finish, press 6.
9Play OGM 1.
After pressing 21, 22, 31, or 32 to play Caller ID records/messages remotely, you can
Press | To |
|
|
1 | Replay the previous Caller ID record or message. |
3 | Skip to the next Caller ID record or message. |
|
|
4 | Replay the current Caller ID record or message. |
5 | Delete the current Caller ID record or message. |
6 | Stop message playback. |
21