Nortel Networks NN43001-121 manual Signaling Server Expert Level CLI Commands

Remote Call Control 213

•SIPCTITotalMonitorStopSuccesses

•SIPCTITotalConferenceCallRequests

•SIPCTITotalConferenceCallSuccesses

•SIPCTITotalSetForwardingRequests

•SIPCTITotalSetForwardingSuccesses

•SIPCTITotalGetForwardingRequests

•SIPCTITotalGetForwardingSuccesses

•SIPCTITotalSessionTerminated

For information on how to access these OM’s through Element Manager, see Element Manager System Administration (NN43001-632).

Signaling Server Expert Level CLI Commands

Using Signaling Server Expert Level CLI commands, as shown in Table 38 "Signaling Server Expert Level CLI commands" (page 213), you can trace AML commands that are sent by the TR/87 FE to the Call Server on behalf of the Office Communicator clients that may be active.

Table 38

Signaling Server Expert Level CLI commands

Prompt	Response	Description
	SIPCTIAmlTrace level	Configure AML Trace level for
		SIP CTI application.
		The level can be one of the
		following:
		0—Turn off trace.
		1—Print all input and output
		AML data buffer.
		2—Print all input and output
		AML data buffer except
		POLLING message.
		3—Print all input and output
		AML data buffer except
		POLLING message, with IE
		type decoding.

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks