Nortel Networks NN43001-121 manual Feature Operation Description

Remote Call Control with SIP CTI 81

Feature Operation	Description
	• Conference Call - cannot be performed through Office Communicator .
	• Call Hold - can be performed through Office Communicator.
	• Call Transfer - Analog telephones do not support the Conference
	and Transfer key features. As a result, Call Conference and Call
	Transfer (Announced and Blind) cannot be performed through Office
	Communicator. Flexible Feature Code (FFC) is not supported by
	AML and RCC.
	• Send DTMF digits - DTMF digits work with both Voice Mail and
	Conferencing.
Multiple Customer	Multiiple Customer operation is not supported within a single Signaling
operation	Server; a separate Signaling Server is required for each customer.
	Multi-customer support is a consideration for future releases. For more
	information about how to configure a Multi-Customer environment, see
	"Multiple customer network" (page 40).
TR/87 Front End	The TR/87 FE application on a Signaling Server can support only a single
application	Call Server.
UDP Location Code	Only one UDP Location Code can be associated with each Signaling
	Server TR/87 interface.
AML interaction	CS 1000 has an Application Module Link (AML) limitation where only one
	application can acquire a DN or TN at any time. For example, the TR/87
	FE application and IP Call Recording feature cannot coexist on the same
	DN or TN. This also applies to the interaction between Symposium and
	Office Communicator Remote Call Control. Symposium uses the AML to
	acquire and control telephones on the CS 1000 Call Server.
Office Communicator	Converged Office requires that the client support RCC. The Web version
Web Access	of Office Communicator, called Office Communicator Web Access, does
	not support RCC.
Office Communicator	Converged Office requires the client to support Remote Call Control, but
Mobile (COMO)	the Mobile version of Office Communicator, called Office Communicator
	Mobile, has limited support for Remote Call Control.
	Outgoing VoIP calls to telephone numbers for Office Communicator Mobile
	are not supported. Remote Call Control only permits telephone status
	updates (for example, on a call or not) when you use Office Communicator
	Mobile. Remote Call Control supports Call Forward with COMO.
Virtual Server 2005	Virtual Server 2005 is not supported as part of Nortel Converged Office.
Office Communicator	When the CS 1000 Call Forward All Calls feature is enabled, only calls
2007 Call Forward All	to the Prime DN or any single-appearance DN on the telephone are
Calls	forwarded. Therefore, if an Office Communicator 2007 acquires a MADN,
	and it is not the Multiple Appearance Redirection Prime (MARP), the call
	is not forwarded even if the Call Forward feature is enabled. For more
	information, see Features and Services (NN43001-106).

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks