Nortel Networks NN43001-121 manual LD 17 Configure AML Link Prompt Response Description, Type Adan

174Configuration

LD 17: Configure AML Link

Prompt	Response	Description
REQ	CHG	Change existing data.
TYPE	ADAN
ADAN	<new ELAN #>	A new AML link; the link is an ELAN type. The link number
		can be from 32 to 47 on a small system and from 32 and
		127 on a large system. An AML link number within the
		above range implies that the transport is over a TCP link.
CTYP	ELAN	Card Type: ELAN

To verify that the AML link is up and running, use the STAT ELAN command from LD 48:

LD 48

STAT ELAN

ELAN #: 032 DES: CDLCS

APPL_IP_ID: 47 .164 .116 .43 : 0000F600 LYR7: ACTIVE EMPTY

APPL ACTIVE

For more information on the STAT ELAN command, see Software Input Output Reference — Maintenance (NN43001-711).

ATTENTION

For redundancy, one AML link is required for each Front End within the node, regardless of whether the Front End is a leader or a follower.

LD 17: Configure VAS (Value Added Server)

Prompt	Response	Description
REQ	CHG	Change existing data
TYPE	VAS	Value Added Server
VAS	NEW
VSID	<VAS#>	VAS ID, ranges from 32 to 47 on a small system and from
		32 to 127 on a large system
ELAN	<LINK #>	AML ELAN link number provisioned when the AML link
		was created
SECU	YES	Security For Meridian Link Applications. Enable this for the
		TR/87 FE application on the Signaling Server to acquire
		DNs

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks