Nortel Networks NN43001-121 manual Configuring the SIP CTI TR/87 ISM limit, Configuring a station

Remote Call Control configuration 175

Configuring the SIP CTI TR/87 ISM limit

Incremental Software Management (ISM) (SIP CTI TR/87) is used to define the number of TNs that can be configured with the T87A class of service. The TR/87 configuration for a given TN requires that in addition to the existence of the CLS T87A, the controlled line itself must also be identified as an AST DN. This implies that AST ISMs are also required.

As part of the ordering process, a corresponding AST license is provided for each SIP CTI TR/87 license. This ISM limit is prompted only if package 408 (MS_CONV) is unrestricted (requires level 2 packages).

The SIP CTI TR87 ISM is an instant ISM and does not require a cold start of the Call Server to take effect (see Figure 62 "LD 22: ISM Limit printout" (page 175)).

Prompt	Response	Description
REQ	prt
TYPE	slt

Figure 62

LD 22: ISM Limit printout

Configuring a station

SIP CTI control of a DN key can be supported on IP, digital, and analog stations.

ATTENTION

Features such as Make Call and Answer Call depend on the hands-free capability of the station and the on-hook default path configuration on the station. Therefore the use of certain features on stations without hands-free support is limited.

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks