Nortel Networks NN43001-121 manual Stri/Stro Wnk Wnk

162Configuration

ATTENTION

The Route Data Block (RDB) must not have a value configured for the prompt INST. Otherwise, incoming calls from Office Communicator to the CS 1000 do not work.

ATTENTION

When configuring the D Channel used by the SIP Trunk for Converged Office Telephony Gateway and Services, configure the NASA prompt to Yes. Failure to do so can result in limited call transfers through Office Communicator.

The CS 1000 SIP trunk that receives Office Communicator calls must be configured to ESN5, and all associated Virtual trunks must be configured to WNK/WNK. These settings are required so that Office Communicator calls to the Public Network display the correct CLID and have the same Network Class of Service (NCOS) as a call from the associated CS 1000 IP Phone.

The Virtual trunk is WNK/WNK if the output from Element Manager, or a terminal window, is:

DES IPTIE

TN 081 0 00 02 VIRTUAL

TYPE IPTI

CDEN 8D

CUST 0

XTRK VTRK

ZONE 000

TRK ANLG

NCOS 0

RTMB 10 3

CHID 3

TGAR 0

STRI/STRO WNK WNK

SUPN YES

AST NO

IAPG 0 *

CLS UNR DIP WTA LPR APN THFD XREP P10 NTC MID

TKID *

AACR NO

ATTENTION

All of the SIP Virtual Trunks must be configured to WNK WNK.

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks