Nortel Networks NN43001-121 manual Screen output, Prompt Response Description

Telephony Gateway and Services configuration 155

When you use a PCA, the MARP must be on the DN key of the phone itself, not the PCA. If the MARP is on the PCA, CTI clients (such as Office Communicator) do not receive Remote Call Control call pop-ups for incoming calls (in addition to other problems). This is an unsupported configuration.

Note that MARP is assigned to the first DN key created, so if you create the PCA first and assign a DN key, it becomes the MARP by default. If you add a phone later with the same DN (to twin the phone with Office Communicator) the MARP stays on the PCA and you encounter this exact situation. The following is an example of an unsupported configuration:

Table 32

LD 22

Prompt	Response	Description
REQ	prt
TYPE	dnb
CUST	0
DN	2070
DATE
PAGE
DES

Screen output

DN 2070TYPE SL1

TN > t T 061 0 00 00 V t y KEY 00 MARP DES I2002 i F m

>28 AUG 2007

(I2002 )

TN 061 0 00 00 V KEY 00 DES I2002 28 AUG 2007 (PCA)

Table 33

LD 20

Prompt	Response	Description
REQ	PRT
TYPE	tnb
TN	096 0 08 15

Screen output

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks