Nortel Networks NN43001-121 manual CS 1000 and Signaling Server installation

OCS 2007 component installation 105

CS 1000 and Signaling Server installation

The first step in the installation and configuration process is to install the CS 1000 and Signaling Server.

Installing the CS 1000 system

To install and configure a CS 1000 system, see the following documents:

•Communication Server 1000M and Meridian 1 Small System Installation and Commissioning (NN43011-310)

•Communication Server 1000M and Meridian 1 Large System Installation and Commissioning (NN43021-310)

•Communication Server 1000E Installation and Commissioning (NN43041-310)

ATTENTION

IMPORTANT!

Converged Office requires the Call Server and Signaling Server to have Release 5.0 software and with the Product Enhancement Packages (PEP) installed.

See the Nortel Converged Office Product Bulletin to ensure that you are using the most current versions of the Call Server and Signaling Server PEPs.

Installing the Signaling Server

The Signaling Server must be installed. If it is not installed, see Signaling Server Installation and Commissioning (NN43001-312).

For information about configuring the Signaling Server, see "Signaling Server checklist" (page 262).

OCS 2007 component installation

After all CS 1000 components are installed, go to the Microsoft Web site www.microsoft.com for information about installing the OCS components, beginning with the Active Directory.

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks