Install the Electronics/Transmitter Module
NOTE: DO NOT place in the direct path of a sprinkler.
The module is water resistant but not waterproof.
6 inches
deep
• Dig a narrow trench or slit from the Vehicle Sensor to the transmitter location using a flat spade or other tool. The wire from the wand to the transmitter should be at least six inches deep to avoid possible damage from edgers, or lawn aerators.
Sensor 
Connecting the Electronics/Transmitter Module
MED |
| TRANSMITTER |
| |
MIN | MAX |
|
| TRANSMIT |
|
| |||
|
| |||
|
| |||
|
| |||
| CODE | ACTIVE | ||
SENSITIVITY |
| |||
|
| |||
GTO WIRELESS EXIT WAND
• Feed the Signal Cable through the PVC pipe and plug into the connector at the bottom of the Electronics/Transmitter module.
4 | W i r e l e s s E x i t S e n s o r |
