GTO GTO installation manual Kit Includes, How it works

ACCESS

SYSTEMS

GTO Wireless Exit Sensor

I N S T A L L A T I O N M A N U A L

Signal Cable	Electronics/Transmitter	Programmable
	Module	Dip Switches
		TRANSMITTER

TRANSMITTER

TRANSMIT

MIN MAX CODEACTIVE

SENSITIVITY

GTO WIRELESS EXIT WAND

TRAN

MAX CODEAC

ENSITIVITY

GTO WIRELESS EXIT WAND

RB709U-NB	Module Cover
Universal Receiver Vehicle Sensor

Kit Includes:

•Wireless vehicle sensor with direct burial coil assembly and a plug-in electronics/transmitter module designed for mounting up to 15 feet away from the pavement edge.

•RB709U-NB two channel receiver with instructions.

•Two size AA batteries.

•GTO Wireless Exit Sensor instruction manual for general installation guidance.

Thank you for purchasing the GTO Wireless Exit Sensor. Please read the directions carefully and completely before installing.

How it works:

The GTO wireless exit sensor consists of a vehicle sensor, transmitter, and programmable dip switches. The maximum range between transmitter and receiver is 80-100 ft.

The transmitter module transmits a special GTO transmitter code with additional information to tell the receiver that this device should be treated as a “free exit” device. The latest GTO gate operators with blue control boards (GTO “GEN3”) are able to decode this format and recognize the device as a free exit or open only command without the use of the RB709U-NB receiver. This will simplify installations so only the original receiver will be required.

The RB709U-NB receiver will be required unless you have the GEN 3 (blue board). The RB-709U-NB has two channels that can be programmed to operate a remote transmitter or keypad and wireless wand. For instance, Channel 1 could be wired to the Cycle and COM accessory terminals and could be programmed to operate a transmitter and keypad. Channel 2 could be wired to the Exit and COM accessory terminals and could be used to operate the wireless exit sensor. Depending on the frequency of use (vehicle traffic) the two AA batteries will last about 1 to 3 years.

For more information on GTO's full line of automatic gate openers and access controls visit our website at www.gtoaccess.com

Rev. 12/01/08 • Printed in China for GTO, Inc.