Nortel Networks NN43001-121 manual Mediation routing table

142Configuration

an INVITE request providing information about which dedicated Mediation Server or Mediation Server pool to process this message. The parameter value for SIP Gateway Endpoint Name is configured in Element Manager under System, IP Network, Nodes: Servers, Media Cards, Signaling Server Properties. The MCM contains a predefined list of Mediation Server addresses associated with a given sip-gw-id . The MCM is then able to determine what pool is used.

ATTENTION

The SIP Gateway Endpoint Name must match the Mediation Server Pool ID, for example, OCS2007_NODE_A. See Figure 46 "Mediation routing table" (page

142)and Figure 57 "Element Manager Signaling Server Properties" (page 165).

Figure 46

Mediation routing table

Click the Add button to configure the Mediation Server pool’s IP address.

Click OK.

Incoming Call Processing Parameters This option refers to incoming CS 1000 calls to MCM that terminate on Office Communicator. You must specify the phone context. When the telephone context is defined, mapping is performed (using CDP or UDP). In the case of a large network, the telephone context used is UDP, while CDP is used for small networks. You can use Called Phone Prefix Delete and Insert fields to manipulate digits received from the CS 1000 prior to mapping.

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks