Nortel Networks NN43001-121 manual Element Manager SIP URI MAP

144Configuration

Figure 47

Element Manager SIP URI MAP

Active Directory configuration section There are two modes for Active Directory (AD) Configuration: Realtime or Local Cache. Realtime mode is used for end-user ID mapping, which requires a Lightweight Directory Access Protocol (LDAP) query. Local Cache mode involves caching the Active Directory on the MCM server and using that cache information for queries.

Table 28

Active Directory configuration

Configuration Field	Description
Query server	Use this field for real-time LDAP AD queries.
Local Cache	AD queries are done to a local cache of
	the AD. The cache is synchronized daily at
	a preconfigured time. You can force it to
	synchronize by clicking the Synchronize Now
	button to start
Local Cache then Query Server	AD queries are done to a local cached of the AD.
	If the entry is not found in the local cache then
	the MCM queries the LDAP AD in real-time.
Non default AD/LDAP Server	IP address and port of the LDAP server to be
	used if different from the default AD/LDAP server.

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks