Nortel Networks NN43001-121 manual Network topology fields Configuration field Description, Sps

MCM 3.0 configuration 141

Network Topology section The following is a description of some of the configuration fields in the Network Topology section of the MCM configuration window.

Table 26

Network topology fields

Configuration field	Description
Call Server	Type of call server CS 1000, CS 2000, CS 2100
SRS	Outgoing SIP messages from the MCM will use the SIP Redirect Server
	for routing.
SPS	Outgoing SIP messages from the MCM will go through the SIP Proxy
	Server.
Direct	Outgoing SIP messages from the MCM will terminate directory to a CS
	1000 SIP GW.
Primary IP	IP address of primary SRS/SPS. Not used in the case of Direct SIP
	Routing.
Secondary IP	IP address of secondary SRS/SPS. Not used in the case of Direct SIP
	Routing.
Registration ID	MCM endpoint ID. This ID is in the format of host@domain. The host
	must match the endpoint name as defined in the NRS/SPS for MCM.
Registration IP	Select the MCM proxy IP to register with the SRS/SPS.
Mode	Proxy mode for SPS. The SIP Proxy Server (SPS) acts as a redirect
	server as well as a proxy server:
	• Proxy All—SPS will proxy/route all messages from the MCM.
	• Proxy SIP and Re-direct SIP-CTI—SPS will proxy/route SIP calls and
	redirect SIP-CTI calls. In this mode, traffic going through the SPS is
	reduced. This can also be useful for administration purposes.
	• Redirect All—SPS will redirect all messages. In this mode, SPS will
	work in the same way as SRS
CS 1000 SIP GW IP	IP address of the CS 1000 Node. Used only for Direct SIP routing with
	the CS 1000.
Transport	Only TCP is supported.
Port	SIP Port on SRS, SPS, and CS 1000. Default values are 5060 for TCP
	and 5061 for TLS connections.
Mediation Server	Select the check box to use Mediation Server.
Routing table	Click the Routing Table button when using Mediation Server.

Mediation Server routing table Several Call Servers from different geographic locations may be connected to one MCM with one SIP Gateway. For each geographic location, one or several Mediation Servers forming Mediation Servers pool can be used. The sip-gw-id parameter is passed as

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks