NETGEAR 7000 Series manual Example #5 Config monitor session 1 source interface

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #5: (Config) monitor session 1 source interface

Specify the source (mirrored) ports and destination (probe) port.

(Netgear Switch Routing)(Config)#monitor session 1 source?

interface Configure interface.

(Netgear Switch Routing)(Config)#monitor session 1 source interface?

<slot/port>Enter the interface.

(Netgear Switch Routing)(Config)#monitor session 1 source interface 0/7

(Netgear Switch Routing)(Config)#monitor session 1 destination?

interface Configure interface.

(Netgear Switch Routing)(Config)#monitor session 1 destination interface?

<slot/port>Enter the interface.

(Netgear Switch Routing)(Config)#monitor session 1 destination interface 0/8

Example #6: (Interface) port security

(Netgear Switch Routing)(Interface 0/7)#port-security ?

<cr>	Press	Enter to execute	the	command.
mac-address		Add Static MAC address to			the interface.
max-dynamic		Set Dynamic Limit for the			interface.
max-static		Set Static Limit	for	the interface.

(Netgear Switch Routing)(Interface 0/7)#port-security max-static ?

<0-20> Set Static Limit for the interface.

(Netgear Switch Routing)(Interface 0/7)#port-security max-static 5 (Netgear Switch Routing)(Interface 0/7)#port-security max-dynamic 10

17-4 Port Mirroring

v1.0, May 2008