NETGEAR 7000 Series manual Example #3 transport output telnet

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #3: transport output telnet

(Netgear Switch Routing) (Config)#lineconfig ?

<cr>	Press Enter to execute the command.
(Netgear Switch Routing) (Config)#lineconfig
(Netgear Switch Routing) (Line)#transport			?
input	Displays	the protocols to use to connect to a
output	specific	line of	the router.
	Displays	the protocols to use for outgoing
	connections from		a line.
(Netgear Switch Routing) (Line)#transport			output ?
telnet	Allow or	disallow new telnet sessions.

(Netgear Switch Routing) (Line)#transport output telnet ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Line)#transport output telnet

(Netgear Switch Routing) (Line)#

Example #4: session-limit and session-timeout

(Netgear Switch Routing) (Line)#session-limit ?
<0-5>	Configure the maximum number of outbound telnet sessions
allowed.
(Netgear Switch Routing) (Line)#session-limit 5
(Netgear Switch Routing) (Line)#session-timeout		?
<1-160>	Enter time in minutes.
(Netgear Switch Routing) (Line)#session-timeout		15

Outbound Telnet 16-3

v1.0, May 2008