NETGEAR 7000 Series manual Example #1 show port security, Example #3 Config port security

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

CLI Examples

The following are examples of the commands used in the Port Security feature.

Example #1: show port security

(Netgear Switch) #show port-security ?

<cr>	Press Enter to execute the command.
all	Display port-security information for all interfaces.
<unit/slot/port>	Enter interface in unit/slot/port format.
dynamic	Display dynamically locked MAC addresses.
static	Display statically locked MAC addresses.
violation	Display the source MAC address of the last packet that
	was discarded on a locked port.

(Netgear Switch) #show port-security

Port Security Administration Mode: Enabled

Example #2: show port security on a specific interface

(Netgear Switch) #show port-security 1/0/10

Intf	Admin	Dynamic	Static	Violation
	Mode	Limit	Limit	Trap Mode
----	--------	-------	------	---------
1/0/10	Disabled	600	20	Disabled

Example #3: (Config) port security

(Netgear Switch) (Config) #port-security ?

<cr> Press Enter to execute the command. (Netgear Switch) (Config) #port-security

Port Security 13-3

v1.0, May 2008