NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
e.Click Apply to save VLAN 48.
3.Create VLAN 38 with IP address 10.100.5.34:
a.From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following displays.
Figure
b.Enter the following information in the VLAN Routing Wizard:
•In the Vlan ID field, enter 38.
•In the IP Address field, enter 10.100.5.34.
•In the Network Mask field, enter 255.255.255.0.
c.Click Unit 1. The ports display.
d.Click the gray box under port 38 twice until U displays. The U specifies that the egress packet is untagged for the port.
e.Click Apply to save VLAN 38.
4.Enable IP Routing:
a.From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.
Access Control Lists (ACLs) |
