NETGEAR 7000 Series Example #2 show igmpsnooping, Example #3 show mac-address-table igmpsnooping

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #2: show igmpsnooping

(Netgear Switch)		#show igmpsnooping?
<cr>	Press	Enter to execute the command.
<slot/port>	Enter	interface in slot/port format.
mrouter	Display		IGMP Snooping Multicast Router information.
<1-4093>	Display		IGMP Snooping valid VLAN ID information.
(Netgear Switch)		#show igmpsnooping
Admin Mode				Enable
Multicast Control Frame Count				0
Interfaces Enabled for			IGMP Snooping	1/0/10
Vlans enabled for IGMP			snooping	20

Example #3: show mac-address-table igmpsnooping

(Netgear Switch) #show mac-address-table igmpsnooping ?

<cr>	Press Enter to execute the command.
(Netgear Switch) #show mac-address-table igmpsnooping
-----------------------	Type	Description	Interfaces
	-------	--------------	-----------
00:01:01:00:5E:00:01:16	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:00:01:18	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:37:96:D0	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:7F:FF:FA	Dynamic	Network Assist	Fwd: 1/0/47
00:01:01:00:5E:7F:FF:FE	Dynamic	Network Assist	Fwd: 1/0/47

12-2 IGMP Snooping

v1.0, May 2008