NETGEAR 7000 Series manual Protected Ports 25-7

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Figure 0-1

b.Under IP Configuration, make the following selections:

•Next to Routing Mode, select the Enable radio button.

•Next to IP Forwarding Mode, select the Enable radio button.

c.Click Apply to enable IP Routing.

5.Configure default route for VLAN 202:

a.From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen similar to the following displays.

Figure 25-5

b.Under Configure Routes, select DefaultRoute from the Route Type pulldown menu.

c.Under Configure Routes, in the Next Hop IP Address field, enter 10.100.5.252.

d.Click Add to add the route that is associated to VLAN 202 to the Learned Routes table.

Protected Ports 25-7

v1.0, May 2008