NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

•To prevent any RIP packets from being transmitted

CLI Examples

The configuration commands used in the following example enable RIP on ports 1/0/2 and 1/0/3 as shown in the network illustrated in Figure 7-4

Figure 7-4

Example #1: Enable Routing for the Switch

The following sequence enables routing for the switch:

(Netgear Switch) #config

(Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#exit

IP Routing Services

7-13

v1.0, May 2008

Page 63
Image 63
NETGEAR 7000 Series manual Example #1 Enable Routing for the Switch, Following sequence enables routing for the switch