NETGEAR 7000 Series manual Example #2 Add the ports to the LAGs, Example #3 Enable both LAGs

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #2: Add the ports to the LAGs

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 0/2 (Netgear Switch) (Interface 0/2)#addport 1/1 (Netgear Switch) (Interface 0/2)#exit (Netgear Switch) (Config)#interface 0/3 (Netgear Switch) (Interface 0/3)#addport 1/1 (Netgear Switch) (Interface 0/3)#exit (Netgear Switch) (Config)#interface 0/8 (Netgear Switch) (Interface 0/8)#addport 1/2 (Netgear Switch) (Interface 0/8)#exit (Netgear Switch) (Config)#interface 0/9 (Netgear Switch) (Interface 0/9)#addport 1/2 (Netgear Switch) (Interface 0/9)#exit (Netgear Switch) (Config)#exit

Example #3: Enable both LAGs

By default, the system enables link trap notification

(Console) #config

(Console) (Config)#port-channel adminmode all

(Console) (Config)#exit

At this point, the LAGs could be added to VLANs.

Link Aggregation 6-3

v1.0, May 2008