NETGEAR 7000 Series manual Create ACL 103 to permit all other traffic

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Create ACL 103 to permit all other traffic.

(Netgear Switch) (Config)#access-list 103 permit ip any any

Deny all traffic with destination IP address 192.168.48.0/24 and permit all other traffic.

(Netgear Switch) (Config)#interface 1/0/24

(Netgear Switch) (Interface 1/0/24)#ip access-group 102 in 1 (Netgear Switch) (Interface 1/0/24)#ip access-group 103 in 2 (Netgear Switch) (Interface 1/0/24)#exit

Deny all traffic with destination IP address 192.168.24.0/24 and permit all other traffic.

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#ip access-group 101 in 1 (Netgear Switch) (Interface 1/0/48)#ip access-group 103 in 2 (Netgear Switch) (Interface 1/0/48)#exit

Web Interface Procedure

To use the Web interface to isolate VLANs on a Layer 3 switch by using ACLs, proceed as follows:

1.Create VLAN 24 with IP address 192.168.24.1:

a.From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following displays.

Figure 9-23

9-26 Access Control Lists (ACLs)

v1.0, May 2008