NETGEAR 7000 Series manual CLI Examples

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

•Intra-area

•Inter-area

•External type 1: the route is external to the AS

•External Type 2: the route was learned from other protocols such as RIP

CLI Examples

The examples in this section show you how to configure a 7000 Series Managed Switch first as an inter-area router and then as a border router. They show two areas, each with its own border router connected to one inter-area router.

The first diagram shows a network segment with an inter-area router connecting areas 0.0.0.2 and

0.0.0.3.The example script shows the commands used to configure a 7000 Series Managed Switch as the inter-area router in the diagram by enabling OSPF on port 1/0/2 in area 0.0.0.2 and port 1/0/ 3 in area 0.0.0.3.

7-16 IP Routing Services

v1.0, May 2008