NETGEAR 7000 Series manual Example #4 permit

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #4 permit

(Netgear Switch) (Config)#mac access-list extended b2

(Netgear Switch) (Config-mac-access-list)#permit 00:00:00:00:00:00 ?

<dstmac>	Enter a MAC Address.
any	Configure a a match condition for all the destination MAC
	addresses	in the Destination MAC Address field.
(Netgear Switch) (Config-mac-access-list)#permit 00:00:00:00:00:00 any
access-queue	Configure	the Queue Id assignment attribute.
cos	Configure	a match condition based on a CoS value.
<ethertypekey>	Enter one	of the following keywords to specify an Ethertype

(appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast,

	netbios, novell, pppo,rarp).
<0x0600-0xffff) Enter		a four-digit hexadecimal number in the range of 0x0600 to
vlan	0xffff to		specify	a custom	Ethertype value.
	Configure		a match	condition based on a VLAN ID.
<cr>	Press	Enter to execute the			command.

Access Control Lists (ACLs) 9-41

v1.0, May 2008