NETGEAR 7000 Series manual Example #1 Create two Lags, Stp

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Figure 6-1shows the example network.

Figure 6-1

Example #1: Create two LAGS

(Netgear Switch) #config

(Netgear Switch) (Config)#port-channel lag_10 (Netgear Switch) (Config)#port-channel lag_20 (Netgear Switch) (Config)#exit

Use the show port-channel all command to show the logical interface ids you will use to identify the LAGs in subsequent commands. Assume that lag_10 is assigned id 1/1/1 and lag_20 is assigned id 1/1/2.

(Console) #show port-channel all
Log.	Port-		Adm.	Link	STP		Mbr	Port	Port
	Channel	Link		Trap		Type
Intf	Name		Mode	Mode	Mode		Ports	Speed	Active
------ --------------- ------ ----				---- ------ -------			------ ---------		------
1/1/1	lag_10	Down	En.	En.	Dis.	Dynamic
1/1/2	lag_20	Down	En.	En.	Dis.	Dynamic

6-2 Link Aggregation

v1.0, May 2008