NETGEAR 7000 Series manual Example #5 logging port configuration

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #5: logging port configuration

(Netgear Switch Routing)		#config
(Netgear Switch Routing) (Config)#logging ?
buffered	Buffered (In-Memory) Logging Configuration.
cli-command	CLI Command Logging Configuration.
console	Console Logging Configuration.
host	Enter IP Address for Logging Host
syslog	Syslog Configuration.
(Netgear Switch Routing) (Config)#logging host ?
<hostaddress>	Enter Logging Host IP Address
reconfigure	Logging Host Reconfiguration
remove	Logging Host Removal

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 ?

<cr>	Press	Enter to execute the command.
<port>	Enter	Port Id

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?

<cr>	Press	Enter to	execute	the command.
<severitylevel>	Enter	Logging Severity		Level (emergency0, alert1,
critical2, error3, warning4,			notice5, info6, debug7).

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?

<cr> Press Enter to execute the command.

(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1

(Netgear Switch Routing) #show logging hosts

Index	IP Address	Severity	Port	Status
-----	-----------------	----------	----	-------------
1	192.168.21.253	alert	4	Active

Syslog 19-5

v1.0, May 2008