NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Select interface

1/0/48 as the provider port.

(Netgear Switch)

(Config)#

(Netgear Switch)

(Config)#interface 1/0/48

(Netgear

Switch)

(Interface 1/0/48)#mode dvlan-tunnel

(Netgear

Switch)

(Interface 1/0/48)#exit

Web Interface Procedure

To use the Web Interface to enable a double VLAN on a VLAN, proceed as follows:

1.Create static VLAN 200:

a.From the main menu, select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the following displays.

Figure 27-2

b.Under VLAN Configuration, enter the following information and make the following selection:

In the VLAN ID field, enter 200.

In the VLAN Name field, enter vlan200.

Select Static from the VLAN Type pulldown menu.

c.Click Add.

Double VLANs

27-3

v1.0, May 2008

Page 213
Image 213
NETGEAR 7000 Series manual Double VLANs 27-3