NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Index

This tag contains the site index that allows direct access to any of the pages under the main tags and sub tags.

Sub Tags

The sub tag content changes depending on the selected main tag. In turn, each sub tag provides further sub categories of functions.

2.Unified Web Control Buttons

Depending on the selected main tag and sub tag, in the lower right corner, there are buttons that enable you to perform various page-dependent operations:

Add

Add a new class, group, ACL, or VLAN.

Apply

Apply all changes that you made to a page.

Cancel

Cancel all changes that you made to a page.

Delete

Delete an existing list or group that was created by using an Add operation.

Refresh

Refresh the data on the page such as log entry, port statistics, and other data.

3.Index Page

One of the unique features of the PCC is the Index page. This page provides links to all available pages on the PCC, allowing you to connect to each page directly. On the Index page, you can use your Web browser’s search function to locate a particular feature, and then connect directly to the page that enables you to view or configure that feature. Note that when you access a page directly from the Index page, the navigation pane does not adjust as it normally would when you navigate to the page by using a main tag and sub tag.

4.Save the Configuration

When you click the Apply button to save the changes, the changes are applied to the switch but not saved into the permanent memory of the switch. When you reboot the switch, the changes are lost.To save the changes into the permanent memory of the switch, use the Save Configuration function that you can reach by clicking on the Maintenance tag and then on the Save Config tag.

Using the Web Interface

4-5

v1.0, May 2008

Page 41
Image 41
NETGEAR 7000 Series manual V1.0, May