NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

b.Enter the following information in the VLAN Routing Wizard:

In the Vlan ID field, enter 100.

In the IP Address field, enter 192.168.100.1.

In the Network Mask field, enter 255.255.255.0.

c.Click Unit 1. The ports display:

d.Click the gray box under port 1 twice until U displays. The U specifies that the egress packet is untagged for the port.

e.Click Apply to save VLAN 100.

2.Enable IP Routing:

a.From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the following displays.

Figure 0-1

b.Under IP Configuration, make the following selections:

Next to Routing Mode, select the Enable radio button.

Next to IP Forwarding Mode, select the Enable radio button.

c.Click Apply to enable IP Routing.

26-4

802.1x Port Security

v1.0, May 2008

Page 206
Image 206
NETGEAR 7000 Series manual 26-4 802.1x Port Security