Nortel Networks NN43001-121 manual 116 Configuration

116Configuration

9For enabling Remote Call Control only, select Enable Remote Call Control and configure the Server URI and Line URI. See Figure 33 "Enable Remote call control" (page 117).

10For enabling Enterprise Voice and PBX integration only (without RCC), select Enable Enterprise Voice and the Enable PBX integration check box. See Figure 34 "Enable Enterprise Voice and PBX integration" (page 118).

11For enabling both Remote call control and Enterprise Voice, you must select Enable Enterprise Voice and the Enable PBX integration check box and specify the Server URI. See Figure 35 "Enable both RCC and Enterprise Voice" (page 119).

12Specify the MCM/App Proxy FQDN in the Server URI field. This must be in the format of sip:CDP or UDP;phone-context=CDP domain or UDP domain@MCM/APP Proxy FQDN. For example:

•Sip:5001;phone-context=cdp.udp@proxy.ocs2007.corp.nor- tel.com – CDP format

•Sip:3435001;phone-context=udp@proxy.ocs2007.corp.nor- tel.com – UDP format

Specify the URI of the user’s telephone in the Line URI field. The Line URI must be in the format tel:E164;ext=CDP or UDP. For example:

•tel:+16139675000;ext=5001 – CDP format

•tel:+16139675000;ext=3435001– UDP format.

ATTENTION

It is important to note that the chosen numbering plan must be applied to the PCA and MCM configurations.

—End—

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks