Nortel Networks NN43001-121 manual Home LOC and Home NPA configuration, DNS Server configuration

		Telephony Gateway and Services configuration 159
Table 35
LD 15
Prompt	Response		Description
REQ	chg
TYPE	net
TYPE NET_DATA
CUST	0
OPT
AC2
FNP
CLID	yes
SIZE	5
INTL	1
ENTRY	0
HNTN
HLCL	967
HLOC	354
...

The response to SIZE must be a number greater than 0. The response to ENTRY must match the CLID table entry for the target telephones. Generally the default is 0.

Home LOC and Home NPA configuration

In order for the correct Caller Line ID (CLID) to be correctly displayed for Office Communicator calls to the Public network, both the HLOC and HNPA can require configuration. All Office Communicators that are part of an ESN network require HLOC configuration. All Office Communicators that make calls to the Public network in North America require that the Area Code be configured.

For more information on the HLOC and HNPA, see IP Peer Networking Installation and Commissioning (NN43001-313).

DNS Server configuration

Host Table configuration is replaced in Release 5.0 with DNS configuration. In Element Manager, under LAN configuration (see DNS configuration), you can enter up to three DNS server IP addresses. The DNS server must be correctly configured with the Fully Qualified Domain Name (FQDN) of

Nortel Communication Server 1000

Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007

NN43001-121 01.03 Standard

Release 5.0 30 April 2008

Copyright © 2005–2008, Nortel Networks