Uniden XSA 975 Mounting the Base Unit on a Wall, Installing the Beltclip, Headset Installation

Page 13

STARTEDIf you are using an optional headset, you must still use the handset keypad

MOUNTING THE BASE UNIT ON A WALL

Direct Wall Mounting

You can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Mount your phone within distance of a working phone jack.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use screws with anchoring devices suitable for the wall material where the base unit will be placed.3mmTOP

1.	Insert two mounting screws into a wall (with their appropriate anchoring device), 85mm apart.


2.	Allow about 3mm between the wall and screw heads for mounting the phone.
2.	Plug the AC adaptor into the Base Unit and then into a power point.										85mm
3.	Plug the telephone cord into the Base Unit and then into the telephone socket on the wall.
4.	Align the mounting slots on the base with the mounting posts on the wall.
5.	Then push in and down until the phone is firmly seated.

GETTING

for phone operations.

INSTALLING THE BELTCLIP

To attach the beltclip:

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip:

Pull both sides of the beltclip to release the tabs from the holes.

HEADSET INSTALLATION

Your phone may be used with an optional headset. To use this feature, simply plug the headset into the headset jack.

Page 5

35mm

Headset Jack

Image 13

Contents Guide Installation & Safety INSTALLATIONThis symbolWall Plug the telephone cord into the BaseRepeat process for second handset GuidestartRegistration of Dual Handset GuideRegistration is occurring To end a callTo record your outgoing message To turn the answering system onTo play your message To repeat a messageCall Transfer Initial SetupTo transfer your call from handset 1 to handset Press 2nd handset is answeredContents Controls and Functions StartedGetting Started Welcome Page/Find Handset FeatureMultiple Handsets up to Wall or Desk Mountable SpeakerphoneGetting Started Included in Your PackageHeadset Installation Installing the BeltclipMounting the Base Unit on a Wall Battery use time per charge Battery MaintenanceWhen the Battery charge becomes low Cleaning the battery contactsSetting Menu Options UsingPhone AutotalkMaking and Receiving Calls Adjusting the Speakerphone Volume Adjusting the Handset Ringer Volume and Earpiece VolumeRedial Selecting a Different Channel Travelling OUT-OF-RANGEFind Handset Call WAITING/FLASHStoring Phone Numbers Press to return to standby modeBetween the digits. Use to delete digits as needed Memory dialing from Standby Mode Memory Dialing from Talk ModeMaking Calls with Memor Y Dialing Chain DialingEditing a Stored Name AND/OR Phone Number Memory DialingErasing a Stored Name AND/OR Phone Number Press and hold . Memory Store is displayedTo transfer your call from handset 1 to handset MemoryStoring and Editing the Rocketdial RocketdialMaking Calls with Rocketdial Deleting the RocketdialCaller ID When the Telephone RingsHere are some typical displays When the pointer is at No When the pointer is at YesViewing the Caller ID Message List Deleting Information from the Caller ID ListDial Edit Calling a Party from the Caller ID ListStored Caller ID Messages in Memory Dialing You can place a call from the Caller ID list PressAnswering System SystemSetting a Personal Security Code PIN Setting the TimeCode 00-99. To select a PIN, perform the following steps Press Until the desired number appearsSetting the Message Record Time Setting the Ring TimePress or until the desired time appears Setting the Message Alert Tone Announce only FeatureAnswering System Choosing Between the Two Outgoing Messages Preset MessageAdjusting the Answering System Speaker Volume Level Setting the Base Ringer VolumePlaying Your Messages Using Your Answering SystemRepeating a Message Deleting a Message Skipping a MessageVoice Memo AnsweringFunction Remote Access Away from HomePress Then Confirmation tone sounds Turn on the Answering System RemotelyAnswering System Remote Operation Card Uniden XSA975 Remote Operation CardThen Repeat a Message Playing Incoming Messages Troubleshooting TroubleshootingIlluminate when the handset Warranty WarrantyOne Year Limited Warranty Serial Uniden Australia Pty Limited Uniden New Zealand Limited For Purchasing a Uniden Product