SYSTEMYou must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.
REMOTE ACCESS AWAY FROM HOME
You can operate your answering system from a remote location using any
1.Call your telephone number.
2.During the greeting message, press and enter your PIN code (Factory Setting: 80). (See "Setting a Personal Security Code", page 20)
3.The answering system announces the current time and the number of messages stored in memory.
Then you hear "To play incoming messages, press 2 . For help, press 0 ".
4.You may continue to listen to the Help Guidance, or you may select a command from the following chart:
Command | Function | |
then | 1 | Repeat a Message |
then | 2 | Playing Incoming Messages |
then | 3 | Skipping a Message |
then | 4 | Deleting a Message |
then | 5 | Stop Operation |
Command | Function | |
then | 6 | Answering System On |
then | 7 | Memo Record/Stop* |
then | 8 | Greeting Message Record/Stop* |
then | 9 | Answer System Off |
then | 0 | Help Guidance |
ANSWERING
*For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again.
5.After all of the Help Guidance prompts have played, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart.
6.When you are finished, hang up to exit the system. The answering system automatically returns to standby.
Page 28