Motorola CP125TM manual Start and Stop Scan G, Delete a Nuisance CHANNEL/ Talkgroup

SCAN

START AND STOP SCAN G

1Press the preprogrammed Scan button to start scan.

Note: The Gindicator blinks to indicate that the radio is scanning. The LCD Screen shows the Prime Channel where the scan began.

2Press the!button to scan the channels in incremental order, and the"button to scan in the opposite order.

3Press the preprogrmmed Scan button to stop scanning.

DELETE A NUISANCE CHANNEL/ TALKGROUP

A channel with unwanted activity is called a Nuisance Channel. You can temporarily delete a Nuisance Channel from the scan list.

18

To Remove a Nuisance Channel

1While the radio is on the nuisance channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone.

2Release the Nuisance Channel Delete button. The nuisance channel is deleted.

Note: You cannot temporarily delete a Prime or Priority channel from the scan list. If attempted, a low-pitched tone is heard, and no action is taken.

To Restore the deleted channel(s)

Restart scan, or simply turn off your radio and turn it on again.

English