Motorola 6880801D90-D manual Configuring Domain Trusts in Windows 2000 Server

Page 19

Configuring Domain Trusts in Windows 2000 Server

A Domain "Trust" must be created between different CENTRACOM domains to enable read access to the CENTRACOM share across domains.

The name of the share created by the installation must not be changed from "CENTRACOM". A Domain Trust is not completed until both sides of the trust have run these procedures.

The procedures in this section must be performed on all CENTRACOM Servers in all domains/zones where IED is running.

1.To setup Domain Trusts, click Start, Programs, Administrative Tools, Active Directory, then Domains and Trusts.

The Domains and Trusts window opens.

2.Right click on the Zone Icon and select Properties.

The properties window opens.

Network Configuration for IED

6880801D90-D

2-5

Image 19

Contents Centracom Gold Series Elite Inbound Event Display IED This page intentionally left blank Foreword Motorola Limited Hardware WarrantyComputer Software Copyrights Labor PartsMotorola Limited Software Warranty How to Receive Depot Warranty Service6880801D90-D Disclaimer Documentation CopyrightsTrademark Information Regional Languages FCC Interference WarningGetting Help Viii Contents Operations dialog Chapter Introduction Control OverviewConfiguring Domain Suffixes for IED Zones Chapter Network Configuration For IED6880801D90-D Click Advanced 6880801D90-D Configuring Domain Trusts in Windows 2000 Server Add trusted domain window opens 6880801D90-D 6880801D90-D Configuring Domain Trusts in Windows Server 6880801D90-D 6880801D90-D Select the Two-wayand click Next 6880801D90-D 6880801D90-D 6880801D90-D This page intentionally left blank Subnets and Broadcast Message Router BMR Chapter Install Broadcast Message RouterInstall Broadcast Message Router BMR Choose Broadcast Message Router 6880801D90-D Setting up a Broadcast Message Router Service Select This Account Click Find Now 6880801D90-D Close the Services and Administrative tools windows Verify or Stop an operating BMR Broadcast Message Router Configuration Bmrc Chapter Bmrc and CDM/ADM ConfigurationSelect Edit then Message Router Configuration… Broadcast Message Router Configuration screen System Port Numbers Install Inbound Event DisplayShut down the Console Database Manager CDM 6880801D90-D Elite Admin Configuration Show/Hide Elite Admin Toolbar and MenuInbound Event Display Creating an Inbound Event Display Specifying a Name for an Inbound Event Display Using the WizardSpecifying Message and Status Codes Specifying Sorting Criteria 6880801D90-D Configuration Summary from the Wizard Customization Display Preferences dialogShow the Inbound Event Display upon Dispatch startup Description Resource Display Filter Message Code Display Filter dialog All Monitored Resources Operating Filter Dialog ControlsStatus Code Display Filter dialog Sorting dialog Resource Timestamp Initial displayed contentSorting Scenarios Inbound Event StateSort by Received Time Order then Primary/non-Primary Event State placed first in the Order of Classifications Inbound Resource Monitor Message and Status CodesEvent State Operations dialog 6880801D90-D Dispatch Operation with Inbound Event Display Dropdown Menus and Handling Events Responding to Events Menu Operations and Buttons Delete by Event Status IndicatorsHandling Events in the Queue 6880801D90-D Modify Inbound Event Display Preferences General Information Enable Audible IndicationCustomize Inbound Event 6880801D90-D Appendix a Registry SettingsThis page intentionally left blank Definition GlossaryGlossary BMR IndexIED