Jabra 6430 Jabra GO Headset, How to Wear the Headset, Assembling or Changing the Wearing Style

7. The Jabra GO Headset

This chapter provides in-depth details about the Jabra GO headset. See also Chapter 3: Product Overview for detailed diagrams.

7.1How to Wear the Headset

You can wear your Jabra GO headset in a variety of styles, each of which can be worn on either the left or right ear., as illustrated below.

Figure 14: Wearing the Jabra GO headset in various styles

Important: Regardless of which wearing style you choose, always be sure to adjust the headset so that the microphone is positioned as close to your mouth as possible. This will maximize the noise-cancelling effect of its microphone and make sure that your voice comes through loud and clear.

Tip: If you use the ear hook, then slide the attachment up or down until the headset fits most comfortably to your ear.

7.2Assembling or Changing the Wearing Style

Jabra GO uses a modular system that enables you to adapt your headset to a variety of wearing styles. You can change your wearing style at any time.

Attaching the Ear Hook for either Ear

To attach the ear hook or change the ear on which you wear it:

1.Remove the current wearing-style attachment, if any.

2.The ear hook attachment fits into a hole that passes all the way through the hinge-like mount on the inner side of the headset. Push the pin of the ear hook down into the top or bottom side of this hole, depending on

which ear you wish to wear it on.

3. Slide the attachment up or down in its fitting until the headset fits most comfortably to your ear.

1 mm

english

Figure 15: Attaching the ear hook

Jabra GO 6430 User manual

22