If you are on a call and receive a second call you will be alerted by a tone.. You can then:
- Put the first call on hold and accept the incoming call by press- ing the Answer/end button
-Switch between the two active calls by pressing the Answer/ end button again
-Tap the Answer/end button once to end the first call and ac- cept the new incoming call
TROUBLESHOOTING & FAQ
I hear crackling noises
-For the best audio quality, always wear your headset on the same side of the body as your mobile phone..
I cannot hear anything in my headset
-Increase the volume on your phone..
-Ensure that the headset is paired with the phone..
-Make sure that the phone is connected to the headset – if it does not connect either from the phone’s menu or by tapping the answer/end button, follow the pairing procedure (refer to pairing section in this user manual)..
-You can determine whether your headset is connected to a device by looking at the flashes on the headset after tapping the answer/end button when the headset is on very slow
single flashes means that the headset is connected to a device, slow triple flashes means that the headset is currently not connected..
I have connection problems
-You may have deleted your headset pairing connection in your mobile phone.. Follow the pairing instructions (refer to the section in this user manual)..
-You can determine whether your headset is connected to a device by looking at the flashes on the headset after tapping the answer/end button when the headset is on very slow
single flashes means that the headset is connected to a device, slow triple flashes means that the headset is currently not connected..
JABRA BT2046 | 9 |