Jabra user manual What the Lights Mean, Using Jabra BT2046 with TWO Mobile Phones

WHAT THE LIGHTS MEAN

What you see	What that means
Solid light	In pairing mode - see Pairing
	section..
Very slow single flash	Connected to phone and in
	standby mode..*
Slow triple flash	Not connected to phone and in
	standby mode..*
Regular double flash	Active on call
Quick double flash	Incoming/Outgoing call
Quadruple flash	Battery low

*BT2046 is equipped with Jabra Discreet Light feature, meaning that light indicator (LED) turns off after 1 min of non-activity.. Headset is still active, and light will flash again after a tap on the answer/end button or any call activity..

USING JABRA BT2046 WITH TWO MOBILE PHONES

Jabra BT2046 is capable of having two mobile phones (or Bluetooth® devices) connected to the headset at the same time.. This will give you the freedom of having only one headset to operate both your mobile phones..

In order to use the headset with two mobile phone please make sure you have ”paired” the Jabra BT2046 with both phones.. See the section “PAIRING IT WITH YOUR PHONE” for instructions..

Once you have “paired” your headset with two phones simply make sure your headset is on, and that Bluetooth® is enabled on the phones and the headset will then automatically connect to both phones..

Please note that Last Number Redial will dial the number from the last outgoing call, independent of the mobile phone, and the Voice Dialing function will only work on the last paired mobile phone..

JABRA BT2046 8